Product ID:887141,5000 SERIES TONER RICOH
MSDS Date:07/10/1986
FSC:6850
NIIN:01-238-1822
MSDS Number: BSFTP

RICOH CORP

3567 PARKWAY LN SUITE 150
NORCROSS, GA 30092
US

Emergency Phone: 404-446-3533

Info Phone: 404-446-3533

Cage: RICOH

RICOH CORPORATION

WEST CALDWELL, NJ 07006-6304 US

Telephone: 800-336-6737

Cage: 54726

STYRENE ACRYLIC RESIN

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9394

METAL COMPLEX CHARGE ORIENTOR

LD50 LC50 Mixture:ORAL RAT LD50 IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Effects of Overexposure:NO SYMPTOMS FROM OVEREXPOSURE.
Medical Cond Aggravated by Exposure:CHRONIC UNPROTECTED EXPOSURE TO
TONER DUST MAY AGGRAVATE BREATHING DIFFICULTIES.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. SKIN: WASH AREA WITH
SOAP AND WATER. INHALATION: MOVE TO FRESH AIR. ORAL: RINSE MOUTH
WITH WATER.

Extinguishing Media:WATER, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NO SPECIAL FIRE-FIGHTING PROCEDURE IS
NECCESSARY.
Unusual Fire/Explosion Hazard:TONER IS COMBUSTIBLE.

Spill Release Procedures:LOOSE TONER CAN BE REMOVED BY USING A VACUUM.
RESIDUE CAN BE REMOVED WITH SOAP AND COLD WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE.
Other Precautions:NONE.

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Ventilation:NORMAL WORK PLACE VENTILATION IS ADEQUATE.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:194F,90C
Spec Gravity:1.1
Solubility in Water:NEGLIGEBLE
Appearance and Odor:BLACK POWDER. FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. DO NOT INCINERATE. NO SPECIAL TECHNIQUE
BEYOND NORMAL PRACTICE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.